DinanTronics Stage 1 Tuner for BMW | F30 | 320i | N20 (EWG)
Have a Question? Ask a Specialist713.955.5846
Dinan Product Description
Stage 1 (DINANTRONICS Performance Tuner ONLY) Maximum Power: 236 HP, 233 lb-ft of torque..
The DinanTronics Power Module is the least invasive way of getting more power from your 320i. The Dinan tuner box plugs into the existing sockets on your engine computer(s). The original wiring harness plugs into the Dinan tuner box. There is no cutting or splicing into wires and the whole harness is completely reversible at any time. Dinan has shown a gain of 53hp and 46ft-lbs of torque with this system.
Because the DinanTronics module plugs directly into the engine computer, it can control the data from every sensor on the engine - not just the two or three that other piggyback-style modules use. Instead of only modifying a boost and RPM sensor, the Dinan power module sends a modified signal for fuel and ignition tables, target Lambda (AFR), exhaust temperature, knock sensors, and more. It has the ability to correct short term fuel trim and ignition timing errors so even as the boost increases through the whole RPM range the engine mapping remains where it should. Not only does it make a lot of peak power, but it's also a smooth and consistent power gain over the entire RPM band. The Dinan tuner module is the most sophisticated on the market and is the only one that is 50-state legal.
Installation is plug and play but requires access to the entire engine compartment. The engine computer(s) is part of the intake manifold so access is tight. The Dinan module is installed under the radiator support and the harness has to be run to each computer. Detailed instructions are included but professional installation is strongly advised if you're not used to working around your engine.
Note: This version of the DINANTRONICS Performance Tuner is only compatible with vehicles equipped with an electronic wastegate. Vehicles with a manufacture date prior to 11/2012 should utilize a mechanical wastegate and are NOT compatible. Vehicles with a production date after 10/2012 should utilize an electronic wastegate and ARE compatible. Only a visual identification is 100% accurate however. Please consult the wastegate identification guide HERE to accurately identify what is on the vehicle.
Benefits of the DINANTRONICS Stage 1 Performance Tuner for BMW 320i EWG N20 Engine:
- +53 HP @ 6000 RPM, +46 lb/ft @ 6000 RPM
- Won't void or negate your warranty
- Emissions legal in all 50 states
- Plug & play installation in two hours or less
- Quick, easy, and discrete installation
Installation Instructions: DinanTronics D440-1646-ST1 Instructions
- 11/2012+ F30 BMW 320i 320iX - Sedan
|BMW||F3X 3 Series||320i||N20 2.0L|
|BMW||F3X 3 Series||320i xDrive||N20 2.0L|
|BMW||F3X 3 Series||328i||N20 2.0L|
|BMW||F3X 3 Series||328i xDrive||N20 2.0L|