IE Audi C7 A6 3.0T Performance Tune (2012+)

Integrated Engineering Product Description

IE AUDI C7 A6 3.0T PERFORMANCE TUNE
IE's motorsport-inspired software brings track-ready ECU programming to your Audi A6 3.0T while retaining factory comfort and reliability. Developed in-house, IE engineers are equipped with industry-leading tuning technology to completely reverse engineer the factory mapping and safely modify it to maximize performance. Years of professional tuning high-powered race vehicles and intimate knowledge of the VW & Audi engines results in a wicked fast car on the street or the track. Your new software tune is easily uploaded to your factory installed ECU (engine control module) without touching a wrench in your own driveway. Multiple tunes are available to match your stock or installed aftermarket hardware.

PRODUCT FEATURES:

• Massive horse power & torque increase
• Multiple stages available
• Improved throttle response
• Increased Rev limiter
• Remove Top Speed limiter
• Requires IE DIY Flash Tool
• Easily and quickly tune your car at home

POWER GAINS

• Stage 1 (stock hardware): +45-55HP & +40-50TQ (ft-lbs) over stock

*Power figures were measured at the hub performed on a hub dynamometer, power figures are taken from multiple vehicles. Power gains may differ from advertised as individual vehicles will vary in maintenance, mileage, and conditions. HP=horsepower, TQ= Torque ft-lbs.

AVAILABLE TUNES

IE STAGE 1
The IE Stage 1 C7 A6 3.0T tune delivers an aggressive power upgrade without having to install any hardware modifications. Perfect for customers looking for a big jump in power without adding any additional hardware. In a matter of minutes, the vehicle will be much more enjoyable to drive with a massive boost in performance.

IE STAGE 2 SINGLE PULLEY
The IE Stage 2 Tune for C7 A6 recalibrates the ECU to take advantage of a smaller diameter supercharger pulley. This faster supercharger speed allows more airflow and higher boost pressures. The result is a powerful engine with a significant increase in power and torque across the rev range. Bottom end torque especially is increased. Files are available from American 91 octane up to Sunoco GT260+ 104 Octane Unleaded. A heat exchanger upgrade is recommended at this stage, but not required.

IE's pump fuel 91/93 tunes are specially calibrated with safe air to fuel mixtures which inhibit "knocking". These mixtures also provide cooler exhaust gas temperature and thus are safer for the 3.0T's fragile catalytic converters then many competition tunes.

EASY AT-HOME TUNE INSTALL

Required to flash your new tune, IE's DIY Flash Tool allows you to quickly upload your tune from your own garage or driveway. This OBD plug-in device is easy to use with a Windows powered laptop and WiFi connection. Your new tool also includes the abilities to switch between multiple octane files (available separately), reading and clearing diagnostic codes, upgrading Stages, or flashing back to stock.

UPGRADING TUNES

Already have an IE Stage 1 tune and IE DIY Flash Tool? Upgrading to Stage 2 or beyond is easy! You only pay the difference in cost between the files with no additional or hidden fees. Once the required supporting hardware is installed, simply plug in your DIY Flash Tool and follow the instructions on your screen to purchase and flash the upgrade file. TECHNICAL FEATURES

DYNOMETER OPTIMIZED

After completely reverse engineering the factory ECU, our engineers use our in-house Dynapack DP42 dynamometer to perform repeated runs to test each change that is made to the software and confirm drivability in any situation. This ensures IE performance software delivers massive horsepower and torque increases across the entire powerband. Using our in-house dyno and advanced tuning tools, IE engineers have fully optimized every aspect of the factory ECU mapping on many different vehicles. This produces a tune that retains all factory like driving and safety protocols when needed, and an intense surge of power when you want it.

REMOVED SPEED LIMITER
The factory ECU speed limiter has been removed to make sure the increased power and torque can be used to its full potential on straightaways and drag strips.

INCREASED REV LIMIT
With the significant power increase, the rev limiter is also increased to allow a wider powerband on all IE files. By increasing the rev limit, you gain a perfect match for the increased performance available from your new IE performance software tune.

IMPROVED THROTTLE RESPONSE
To further increase the responsive feel of the car, IE engineers have carefully adjusted the throttle sensitivity. This offers a more connected feeling to your car with plenty of power available right beneath your foot.

OPTIMIZED FUELING
All IE tunes have been adjusted to run as economically as possible, dialing in air/fuel ratios to exactly where they need to be. With an IE performance ECU flash, it is common to see increased fuel economy under cruising and part-throttle driving.

Fitment:

• AUDI - C7 A6 3.0T SUPERCHARGED ENGINES (2012-2017)
• AUDI - C7 A6 ALLROAD 3.0T SUPERCHARGED ENGINES (2012-2017)